Club Member's bikes or bits for sale or wanted
Email the Web Manager to place an advertisement. Don't forget to let the Web Manager know when the ad is no longer required! Ads will remain on this page for six months then removed, re-apply if you still wish to have your ad displayed.
If you think you are being scammed on this website don't complete the transaction or have any further dealings with the person you suspect is cheating you. Report any scams to the Web Manager. Many of the scams reported originate from overseas so it is suggested you disregard offers from outside of Australia.
If you have bought something advertised on this website and believe it was not fairly described let the Web Manager know and this seller will not be permitted to advertise again. The YAMAHA XS650 Club of Australia does not support dishonest sellers.
If you are not a Club member, suitable identification with verifiable address must be provided before an advertisement can be posted. Contact the Web Manager for further assistance.
For sale by non member 8/3/2018 (Identity confirmed)
XS650 Special , 1979 model.
For sale by Club member 7/3/2018
Yamaha XS650 1981 Special, runs
well and can be viewed at Geoff's Shed.
Wanted by member 7/3/2018
Does anyone have a good spare alternator rotor for a '78 XS650? I am also after some 35mm triple trees. if you have any of these and you want to sell them contact Craig Bath at firstname.lastname@example.org
Wanted by non member 3/3/2018
Does anyone have a Yamaha XS650 front end they want to sell?
Complete front end wanted including triple trees, forks and front wheel. Can be either early 34mm forks or later 35mm forks. If you have some please let me know. Needed for a friend.
Terry Gliddon email@example.com or call 0408746881
For sale by non member 16/1/18
Yamaha XS650, 1981 Model,
Ring Kelvin for details 0407 031 165
For sale by club member 12/1/18
Special for sale the attached photo of the special was taken before I fitted flat slide carbies and chain guard, the special has a 750 kit, rephrased crank, ported head and trost cam, oil cooler extensive frame bracing including front fork bracing and the original Newtronics prototype ignition for the rephrased crank, along with the bike will be a DJP side car, hydraulic bike lift, three crank cases with gearbox components, 2 rebuilt crankshafts 1 x 447 and 1 x 256 also included are 6 barrel and piston sets one with 750 kit, 6 complete heads various clutch components, alternators, new cam chains, new cam bearings, new parts washer never been used and lots more other parts.
I will start cleaning everything up this weekend, the chopper has a 256 motor with a 750 kit ported head and cam and has never been started. I will be asking for the lot to go in one sale asking $10,000 ONO for the lot.
For sale by non member 23/11/17
I have a job lot of XS parts for
sale (looks like XS750 or XS850 parts - Terry
Best Regards / Many Thanks
For sale by club member 21/11/17
For Sale: Yamaha XS650SE 1978 $8900
Parts Wanted 11/11/17
would like to buy 1981 XS650h Chain Guard
For sale by club member 2/10/17
Rack to fit 1975 XS650 I paid
$600 but I want $300
For sale by non member 27/9/17
More pictures to come
I am the third owner of the bike, a bloke that used to work for the previous owner had owned the bike since new and sold it to him when he retired, He done it up over a winter at Lock Haven Pennsylvania in 2009 and then done around 5000miles on it before selling it to me in 2015. The bike has 57000 miles on it (or around there) and is a 1980 XS650 SG Special II. The bike was (as all that was produced that year) black but with the previous owner being a lover of fords it is now painted in Tornino red and off white with a hint of silver striping. The bike has had all the usual stuff completed during the build eg brass bushes in frame and head stem, brakes, new lights, complete sandblast of frame, tank and side covers, new paint, new tyres, polished alloy cases etc. It is all original apart from paint.
I have all the import paper work and the bike is located in Adelaide.
I would like to get $7500 firm
Contact Michael Bourne on 0498 693 454 or Email: firstname.lastname@example.org
Wanted by club member 10/9/17
Right side front foot peg for a 1978 Yamaha XS650 as pictured, must be later model as the mounting stud spacing is different from the earlier model.
If you have one for sale please contact Peter Dexter at email@example.com
For Sale 27/4/17
Call Robin 0459 204 272 (Boronia area Victoria.)
(viewed and photos by John Chambers) 0414 978 763
98% complete bike as seen $3000 negotiable
Offers to ex club member 14/3/17
I would like to give a priority to club members if interested in making an offer before I put it up for sale.
The rego has not been renewed since last year,
due to me being away from home and the bike not
For sale by club member 8/2/17
Mark Peatman is offering for sale his beautiful café racer pictured here. His asking price is $9500
If you are interested contact Mark at firstname.lastname@example.org
Mark also has some copper head gaskets for sale, these are 750cc 1.2mm thick and wants $80 each for them.